The Wangen BIO-FEED
Ideally suited for Biogas Fluids
Introduction of Solids into Biogas Fluids
The Wangen BIO-FEED PC pump is specially designed to allow the continuous introduction of solids into a liquid. Especially useful in the biogas industry or in wastewater treatment plants.
Due to the pushing of the screw connection, WANGEN BIO-FEED turns into a high-performance suction pump.
You can use it as a central pump in biogas plant.
And the WANGEN BIO-FEED can also be used in waste water treatment plants for conveying sewage sludge.
- Sewage sludge
- Food waste
- Chopped corn silage
- Straw and grass silage
- Whole crop silage
- Dry chicken faeces
- Hackled sugar beets
- X-LIFT quick change system
- Large-scale mixing chamber
- Specially-developed joint with milling screw
- Liquid addition and high-performance central pump
- Benefits
- Demonstration
- Features
Wangen Bio-Feed Pumps – Ideal in Biogas Installations
WANGEN PUMPEN’s developed BIO-FEED is designed especially for machines that would like to combine existing screw technology at the solids dispenser with the feeding of liquids.
With a specially-developed milling screw, you can mix the solids that are to be added with the separately added liquid and convey it into the desired containers.
With our innovative X-LIFT quick-change system, the wearing parts are easy to replace.
Only a few simple steps are needed, without this requiring disassembly of the pump from the piping system.
Thereby, WANGEN BIO-FEED is also suitable for use in restricted spaces.
- Connections: 4 x DN 150, 1 x DN 400
- Modern waterproofing system (LWD mechanical seals)
- Very strong and fully developed cardan shaft drive with pre-feed screws
- Wide selection of gearboxes
- Port of inspection
- Stator with S-cone inlet for optimal filling of the pumping chamber
- Various geometries and pump sizes
Technical Features
Flow Rate | Up to 50 m³/h |
Maximum Pressure | 6 Bar |
Maximum Dry Content | 15 % |
All data are provided as information only and can be adapted without notice.
SPS Pumps is There to Help
At SPS Pumps, our Landia Centre of Excellence is there for you, to help finding the most adequate pump for your application. Our expertise is second to none.
Do you need any help?
Contact us today!
Call us on +32 2 657 23 53 or send us an e-mail to info@sps-pumps.com.
This information is provided courtesy of Wangen Pumpen GmbH.